Stepping Motor Factory

- Sep 16, 2020-

A factory specializing in the production of stepping motor, stepping motor is the electrical pulse signal into angular displacement or linear displacement of the open-loop control components.In the case of non-overload, the motor speed, stop position only depends on the pulse signal frequency and pulse number, and is not affected by the load change, that is, to add a pulse signal to the motor, the motor will turn a step Angle.The existence of this linear relationship, coupled with the stepper motor only periodic error and no cumulative error and so on.It makes it very simple to use stepper motor to control speed, position and other control areas.Single-phase stepping motor has a single electrical pulse drive, the output power is generally small, its use for micro power drive.The multiphase stepping motor is driven by multiphase square wave pulse.When using a multiphase stepping motor, a single circuit electrical pulse signal can be converted into a multiphase pulse signal through a pulse divider, and then fed into each winding of the stepping motor after power amplification.Every time a pulse is input to the pulse divider, the energized state of each phase of the motor will change, and the rotor will turn a certain Angle (known as the step Angle).


Previous:Buy Stepping Motor Next:Discount AC Power Motor